Mash Heater ME500/ ME1000 / ME2500 Module

Maish Heater ME 500 Module

Production Capacity: up to 500 kg/h

Maximum product temperature: 65 ° C.

The mash is pushed through the tube heater by means of a screw pump. The construction ensures optimal turbulence of the product and reaches the core temperature.

Including:

  • pipe to pipe – heat exchanger
  • stainless steel frame made of 1.4301 (V2A) (welded)
  • stainless steel cladding
  • circulating pump
  • cavity Pump
  • control box made of stainless steel
  • automatic temperature control
  • dry-run protection sensor
  • hose
  • Power: 2.2kW
  • El. Voltage: 16A / 3x400V / Neutral / Ground

On Site Requirements:

  • Required thermal power: approx. 75-85kW
  • Required flow temperature: at least 85 ° C
  • Required pipe cross-section: at least DN40

Mash Heater ME 1000 Module

Production Capacity: up to 1000 kg/h

Maximum product temperature: 65 ° C.

The mash is pushed through the tube heater by means of a screw pump. The construction ensures optimal turbulence of the product and reaches the core temperature.

Including:

  • pipe to pipe – heat exchanger
  • stainless steel frame made of 1.4301 (V2A) (welded)
  • stainless steel cladding
  • circulating pump
  • cavity Pump
  • control box made of stainless steel
  • automatic temperature control
  • dry-run protection sensor
  • hose
  • Power: 2.2kW
  • El. Voltage: 16A / 3x400V / Neutral / Ground

On Site Requirements:

  • Required thermal power: approx. 75-85kW
  • Required flow temperature: at least 85 ° C
  • Required pipe cross-section: at least DN40

Mash Heater ME 2500 Module

Production Capacity: up to 2500 kg/h

Maximum product temperature: 65 ° C.

The mash is pushed through the tube heater by means of a screw pump. The construction ensures optimal turbulence of the product and reaches the core temperature.

Including:

  • pipe to pipe – heat exchanger
  • stainless steel frame made of 1.4301 (V2A) (welded)
  • stainless steel cladding
  • circulating pump
  • cavity Pump
  • control box made of stainless steel
  • automatic temperature control
  • dry-run protection sensor
  • hose
  • Power: 2.2kW
  • El. Voltage: 16A / 3x400V / Neutral / Ground

On-Site requirements:

  • Required thermal power: approx. ca. 180-200kW
  • Required flow temperature: at least 85 ° C
  • Required pipe cross-section: at least DN40